home *** CD-ROM | disk | FTP | other *** search
- Path: news.dircsa.org.au!not-for-mail
- From: arthur@gateway.dircsa.org.au (Arthur Marsh)
- Newsgroups: comp.dcom.modems
- Subject: Re: Help with my Motorola 28.8
- Date: 18 Feb 1996 12:08:52 +1030
- Organization: DIRC - Disability Information & Resource Centre - Sth Australia
- Message-ID: <4g5vvc$bbq@gateway.dircsa.org.au>
- References: <DMtB0D.AwJ@gil.com.au>
- NNTP-Posting-Host: gateway.dircsa.org.au
- X-Newsreader: TIN [version 1.1 PL8]
-
- jmangano@gil.com.au wrote:
- : I need desperate help with my Motorola 3400 28,8k modem!
- : I can get it working fine with one exception.
-
- : It spews out errors everywhere! If I ring up anywhere at any speed, every
- : 10 characters or so comes out screwed, or it just misses them completely.
- : Can ne1 please tell me what the hell is going on and how to fix it? This
- : is driving me nuts! :)
-
- Make sure that you have bidirectional hardware flow control enabled in your
- software and in your modem. The Lifestyle needs &R0 set for this.
- Also, enable retrains with a %R2 or %R3 command.
-
- A profile for a Motorola Lifestyle used here is:
-
- AT&V
-
- ACTIVE PROFILE: DTE = 38400 BPS 8/NONE/1
- E1 H2 L2 M1 Q0 V1 X4 Y1 &C1 &D3 &G0 &L0 &M0 &P0 &R0 &S0 &T4 &X0 %A0 %B16 %C1
- %D0 %L1 %R2 \A3 \B35 \C0 \G0 \J0 \K5 \M1 \N7 \Q3 \R1 \T0 \V3 \X1 *AS1
- *DG0 *DN0 *DR0 *FT0 *ID0 *MM0 *OR0 *RA0 *TD16 *TH2 *TL21
- S00:002 S02:255 S03:013 S04:010 S05:008 S06:004 S07:030 S08:004 S11:080 S12:050
- S18:000 S25:005 S26:000 S41:061 S42:050 S73:000 S74:015 S75:000 S76:015 S77:000
-
- --
- Arthur Marsh, telephone +61-8-370-2365, fax +61-8-223-5082
- arthur@dircsa.org.au
- .endofsig
-